S550 GT Stage 0 NA
Getting the MOST from your stock car in terms of power and drive-ability.
The Mustang ECU has the ability to monitor frequencies from the knocks sensors which allows the ECU to adjust ignition timing accordingly. If it detects excessive noise (Knock) it will reduce the the final ignition angle to protect from detonation. On the flip side, if the knock sensors detect minimal noise then the ECU can use that information to slightly advance the ignition angle which created more power. So, if you run 99 octane fuel instead of 95 octane fuel you WILL feel a difference in some parts of the rev range under full throttle and even responsiveness on throttle tip-in
However, to get the MOST out of your stock setup you need a tune and this why!
The stock Mustang GT implements various torque limitations in both the engine and transmission control units to limit the amount of torque the engine can make, it does this by closing the throttle plate as much as it is needed to keep the torque produced under the set limit. When running higher octane fuel the ECU advances the ignition angle which produces more torque than the stock torque limit, so the ECU modulates throttle angle throughout a wide-open pull to control torque which stops you from making all the power you could.
With a tune we can alter torque control strategies within the ECU to allow the engine to make the most power it can on higher octane fuels. Meaning the throttle plate will stay open for the duration of a wide open throttle pull, giving you more power and a much smoother sweep of the engines rev range.
If you religiously use 98-99 octane fuel we can build a custom tune to suit one specific fuel type, meaning your engine will make plenty more power, consistently without any torque intervention or inconsistency of spark adders.
As well as more power we can calibrate additional extras such as active launch control, O2 Failure protection strategies, overrun burbles / crackles etc
1. Store Orders Fulfilment Information
All orders are subject to product availability. As U.K stock of items increases, more and more products are available for delivery within 3 working days. However many items that we offer, may only be available at the manufacturer and can take time to get in for you.
Wherever possible, we aim to fulfil all orders within 15 working days. In instances like this where the three days are exceeded, we will inform you and aim to keep you updated.
In extreme circumstances, some products may only be manufactured to order, these delivery times can be over a month from the purchase date. We will contact you to let you know if this is the case before we place the order with the manufacturer.
In any case, please feel free to contact us for an ETA or updates on your order once it is placed.
2. Services General Information
When booking services with us, the booking date will reflect stock availability. In some cases we may require a deposit from you at the time of booking.
In instances where service pricing is listed as 'from', the minimum price of the service is being advertised and the actual price will vary, dependant on the work required for your specific vehicle and potential option variants.
3. Pricing and Information Disclaimer
All prices and descriptions on this website are subject to change without notice. Whilst we make every effort to provide you with the most accurate, up-to-date information, occasionally, one or more items on our website may be mis-priced or mis-represented. In the event that a product is listed incorrectly due to typographical, photographic, a technical error or error in information received from our suppliers, Motorsport and Performance Ltd shall have the right to refuse or cancel any orders placed.
If an item's correct price is lower than our stated price, we will refund the difference before shipping you the item.
If an item's correct price is higher than our stated price, we will notify you of the price error and give you the option to proceed with the order at the correct price or cancel the order.
